Philips HQ789 Bedienungsanleitung Seite 16

EnglisH
16
troubleshooting
Problem
The shaver
does not shave
as well as it
used to.
The shaver
does not work
when I press
the on/off
button.
The shaving unit
has come off
the shaver.
Solution
The Jet Clean system may not have cleaned the shaver
properly because the cleaning fluid in the cleaning
chamber is soiled or the cleaning fluid level is too low.
Clean the shaver thoroughly before you continue
shaving. If necessary, clean and refill the cleaning
chamber (see chapter 'Cleaning and maintenance').
The shaving heads may be damaged or worn.
Replace the shaving heads (see chapter
'Replacement').
Long hairs may obstruct the shaving heads. Clean
the cutters and guards with the brush supplied
(see chapter 'Cleaning and maintenance').
The battery may be empty. Recharge the battery
(see chapter 'Charging') or connect the shaver to
the mains.
The shaver may not be connected to the mains. Put
the appliance plug in the shaver and put the adapter
in the wall socket.
The shaving unit was not placed correctly. Put the
shaving unit back onto the shaver by inserting the
hinge into the slot in the rim of the hair chamber.
Then push the shaving unit home until it locks into
place ('click').