Removing The Rechargeable Shaver Battery; Guarantee And Service; Guarantee Restrictions - Philips HQ789 Bedienungsanleitung

removing the rechargeable shaver battery

Only remove the battery if it is completely empty.
1 Remove the adapter from the wall socket and pull the appliance
plug out of the shaver.
2 Let the shaver run until it stops and undo the two screws in the
back of the shaver (Fig. 37).
3 Undo the two screws in the hair chamber (Fig. 38).
4 Undo the three screws in the power unit (Fig. 39).
5 Bend the 4 hooks aside (1) to take out the power unit (2) (Fig. 40).
Be careful, the hooks are very sharp.
6 Remove the power unit cover with a screwdriver (Fig. 41).
7 Remove the rechargeable battery.
Be careful, the battery strips are very sharp.
Do not connect the shaver to the mains again after you have removed
the battery.

guarantee and service

If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.

guarantee restrictions

The shaving heads (cutters and guards) are not covered by the terms of
the international guarantee because they are subject to wear.
EnglisH
15