Philips HQ6894 Bedienungsanleitung Seite 3

type of beard and your shaving behaviour, and is
calculated by the built-in computer.
C
Cleaning reminder
The blinking tap symbol reminds you that the
appliance is due to be cleaned, which will be
approx. once a week in case of normal use.
C
Batteries running low
When the batteries are running low, the plug
symbol will start blinking after you have switched
the shaver off.
When you switch the shaver on or off, the light in
the display goes on for approx. 10 seconds.
The appliance has a 1-minute demonstration
program.
Press the on/off button a few seconds until all
symbols appear on the display.You can interrupt
the demonstration by pressing the on/off button.
Charging
Do not expose the appliance to temperatures
lower than 5cC or higher than 35cC.
The powerplug is suitable for mains voltages
ranging from 110 to 240V.
You can also shave without charging by
connecting the shaver to the mains.
To extend the lifetime of the batteries, remove
the powerplug from the wall socket and pull the
appliance plug out of the shaver when the
batteries have been fully charged.
ENGLISH
5