Qlima P 432 Gebrauchsanweisung Seite 91

2 Connect the supplied hose J (see fig. 1) to where the rubber plug was (see fig.
20) and fasten the hose with hose clip I.
3 Fit the hose holder G (see fig. 1) to the rear of the air conditioner (see fig. 21).
4 If the hose is not being used to drain the condensation, place the hose in the
hose holder to prevent leaks (see fig. 22).
5 To drain the condensation, take the hose out of the holder and drain the
condensation into a floor drain or collection tank (see fig. 23).
Fig. 20
Fig. 21
Fig. 22
Fig. 23
4
91