Intended Use; Product Features; Technical Data; Noise/Vibration Information - Bosch PDA 180 Originalbetriebsanleitung

Intended Use

The machine is intended for dry sanding and pol-
ishing of wood, plastic, metal, filler, as well as for
painted surfaces. It is ist especially suitable for
profiles, corners or hard to reach locations.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselec-
tion(PDA 180 E)

Technical Data

Delta Sander
Article number
Rated power input
Output power
No-load speed
No-load orbital stroke rate
Sanding plate size (corner to corner)
Orbit diameter
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 80 dB(A); Sound
power level 91 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
ty K <1.5 m/s .
Bosch Power Tools
2
=6.5 m/s , Uncertain-
h
3 Extraction outlet
4 Sanding sheet*
5 Sanding plate
6 SDS button for release of the sanding plate
7 Vacuum hose*
8 Pad extender*
9 Sanding plate for extender*
10 Narrow pad extender*
11 Narrow rounded pad extender*
*The accessories illustrated or described are not in-
cluded as standard delivery.
0 603 339 0..
W
W
rpm
opm
mm
mm
kg
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
English | 15
PDA 180 PDA 180 E
0 603 339 7..
180
80
6800 – 9200
9200
13600 – 18400
18400
92
1.5
1.1
/ II
1 609 929 N22 | (13.12.07)
180
80
92
1.5
1.1
/ II