Safety Equipment; Technical Data - Grizzly BRM 56-163 BSA Quattro Originalbetriebsanleitung

UK

Safety Equipment

3 Safety catch
The equipment stops when the
safety catch is released.
6 Impact protection
protect the operator from parts
that are flung out and from ac-
cidentally touching the blades
when mowing with no grass col-
lection box.
10 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust
15 Lateral ejection with impact
protection
prevents the lateral ejection of lawn
cuttings and solid parts and strings
up the lawn cuttings from the side.

Technical data

Petrol lawn mower ...................................
......................... BRM 56-163 BSA Quattro
Performance .................................2.64 kW
Engine 4-stroke .........................................
............. Briggs & Stratton 675IS INSTART
Engine size ...................................163 cm
Blade rotation speed n
Blade torque ................................... 45 Nm
Wheel drive.......................... aprox. 3 km/h
Petrol tank volume .............................. 1.0 l
Octane rating ....................................95-98
Engine oil tank volume ................... 470 ml
Motoroil .................. HD SAE 30 or 10W-30
Spark plug ...................Champion XC92YC
Cutting width .................................560 mm
Cutting height ..............6-steps, 25-75 mm
Grass collection box volume................ 75 l
Weight ...........................................38,1 kg
Sound pressure level
(L ) .....................83,3 dB (A), K
pA
90
............ 2900 min
0
=2,5 dB
PA
Sound power level (L
measured.......... 97,58 dB (A); K
guaranteed ..................................98 dB(A)
Vibration (a )
n
at the left handle .... 6,185 m/s
at the right handle ...6,862 m/s
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
3
-1
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
)
WA
=0,91 dB
WA
; K=1,5 m/s
2
; K=1,5 m/s
2
2
2