EINHELL BG-EM 1437 Originalbetriebsanleitung Seite 15

2. Explanation of the warning signs on
the equipment (see Fig. 8)
1 = Read the directions for use before operating the
equipment
2 = Wear ear guards and goggles
3 = Keep all other persons away from the danger
zone.
4 = Caution! -Sharp blades- Before carrying out any
maintenance work or if you damage the cable,
pull the plug out of the socket.
5 = Caution: The cutters continue to run after the
motor is switched off
6 = Do not expose the equipment to rain or moisture.
7 = Caution: Keep the power cable away from the
cutters!
3. Layout (Fig. 1 / 2)
1. ON/OFF switch
2. Cable strain-relief clamp
3. Carry handle
4. Grass basket
5. Ejector flap
6. Mains plug
7. Top push bar
8. Bottom push bar
9. Fastening screws for bottom push bar
10. Fastening screws for top push bar
11. Cable clips
12. Grass box housing halves
13. Grass box handle
4. Items supplied
Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Original operating instructions
n
Safety instructions
n
5. Proper use
The lawn mower if designed for use in private
gardens.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
6. Technical data
Voltage:
Power input:
Motor speed:
Cutting width:
Cutting height adjustment:
Volume of catch bag:
L sound pressure level:
pA
L sound power level:
WA
Vibration at the handlebars a
Protection class
7. Before starting the equipment
The lawn mower is delivered unassembled. The
complete push bar and the grass collector must be
assembled before using the lawn mower. Follow the
operating instructions step-by-step and use the
pictures provided as a visual guide to easily
assemble the machine.
7.1 Fitting the push bar (Fig. 3a to 3d)
Fit a bottom push bar (Fig. 3a / Item 8) into the
opening provided for it (Fig. 3a) and secure it as
shown in Fig. 3b with a screw (Fig. 3b / Item 9).
Proceed in the same way on the other side.
When you fit the top push bar you can decide the
height of the push bar by selecting the appropriate
GB
230 V ~ 50 Hz
1400 watts
3500 rpm
37 cm
25-60 mm; 3 levels
36 liters
73,7 dB(A)
96 dB(A)
: ≤ 2,5 m/s
hv
II/®
15
2