Easyclean; System (Oven Cleaning System) - NEFF E 1641-Serie Gebrauchsanweisung

EasyClean

® system:
The oven cleaning function featured in your
oven is intended to help you keep your
oven neat and tidy. An amount of cleaning
solution is vaporised automatically. The
combined effects of heat and steam soften
the soil deposits on the oven wall enamel
and facilitate their removal.
Caution:
Use this function only after the oven has
completely cooled (room temperature).
Use normal water only, and no distilled
water.
Activate oven cleaning:
1. Remove the baking sheet and the
universal baking pan from the oven. The
baking grill may remain in the oven.
2. Pour approx. 400 ml of water mixed
with a little dishwashing detergent into
the floor pan of the oven cavity.
In the case of heavy soil build-up, you
may wish to allow the cleaning solution
to soak in for a while before you activate
the cleaning function.
3. Close the oven door.
CAUTION:
The oven cleaning function can only
be switched ON when the oven has
cooled down completely.
4. Turn the function selector to position
The indicator light and the
x
indicator light for oven temperature
illuminate.
is displayed.
*
If flashes, the oven has not
*
cooled down completely.
After the initial heating time (approx.
4 minutes) the oven temperature
control lamp extinguishes. After a
further 17 minutes the program cycle
is completed. A buzzer sounds.
Switching OFF:
Turn the function selector to the
The oven cleaning control lamp
extinguishes.
66
Cleaning and Care
x
.
x
C
position.
{
Function selector