Technical Data; Ordering Replacement Parts - EINHELL BAS 18A Bavaria Bedienungsanleitung

Anleitung BAS 18 A SPK 1
On/Off switch (4)
Infinitely variable speed control is possible with the
On/Off switch. The further you press the switch, the
higher the speed of the battery-powered
drill/screwdriver.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size. Set the torque, as
described elsewhere in these operating instructions,
to suit the size of screw.

Technical data

Voltage supply
Speed 0-550 rpm
Torque
Forward and reverse rotation
Chuck clamping width
Battery charging voltage
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Sound pressure level LPA: 64,2 dB(A)
Sound power level LWA: 75,2 dB(A)
–
Vibration
a
w
Weight

Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
06.05.2005 10:34 Uhr
18 V =
17 levels
yes
1 - 10 mm
21 V =
400 mA
< 2,5 m/s 2
1,6 kg
Seite 7
GB
7