Technical Data; Residual Risks; Before Starting The Equipment - EINHELL TH-CD 12 Li Originalbetriebsanleitung

4. Technical data

e-
ng,
Motor supply voltage: ...............................12V DC
st
Idling speed: .......................................0-400 min
Torque settings: ........................................... 19+1
Clockwise/Counter-clockwise: ........................Yes
f
Clamping range of drill chuck: .......... max. 10 mm
nty
Battery charge voltage: .......................... 12 V DC
e
Battery charge current: ................................ 0.5 A
p-
Battery charger supply voltage: ....... 230 V ~ 50Hz
Charging time: ..............................max. 3-5 hours
Battery type: ............................................... Li-Ion
Weight: ..........................................................1 kg
Sound and vibration
r
Sound and vibration values were measured in
accordance with EN 60745.
l
L sound pressure level ..................... 83.1 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
e L sound power level ....................... 94.1 dB(A)
WA
ic
K uncertainty ............................................. 3 dB
WA
r of
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Drilling in metal
Vibration emission value a
K uncertainty = 1.5 m/s
Screwing without hammer action
gh-
Vibration emission value a
ng
K uncertainty = 1.5 m/s
Warning!
-
The specifi ed vibration value was established in
accordance with a standardized testing method. It
e
may change according to how the electric equip-
nju-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
de-
The specifi ed vibration value can be used to
al
compare the equipment with other electric power
tools.
rial
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Anl_TH_CD_12_Li_SPK1.indb 17 Anl_TH_CD_12_Li_SPK1.indb 17
GB
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
-1
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.

Residual risks

Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Be sure to read the following information before
you put the cordless screwdriver into operation:
1. Charge the battery only with the charging unit
supplied.
≤ 2.5 m/s
2
h
2. Only ever use sharp drill bits and screwdriver
2
bits which are suitable for the purpose and in
faultless condition.
3. Always check for concealed electric cables
=10.77 m/s
2
h
and gas and water pipes when drilling and
2
screwing in walls.
- 17 -
19.09.13 16:35 19.09.13 16:35