Safety Notes; Designated Use; Risk Of Burns - Litecraft held slnt ww Bedienungsanleitung

Safety Notes

• Each person which is responsible for the installation, the use or
service of this unit must be:
• qualified
• has to follow the instructions in this manual
WARNING!
Be careful when using the device. You risk an electrical shock
from high voltage, if you touch the wires!
• The device has left our company in manufacturer proofed
state. To maintain this status and to ensure a permanent safe
operation, it is absolutely necessary to follow the safety inst-
ructions and warnings in this manual.
IMPORTANT!
Errors, caused by not following these instructions are not co-
vered by the warranty. The manufacturer will not accept liabi-
lity for any resulting defects or problems.
• Keep the unit away from radiators or other heat sources!
• If the unit has been exposed to tremendous temperature chan-
ges (e.g. after transportation), do not turn it on immediate-
ly. The resulting condensation could damage the unit. Don`t
switch unit on until the device reaches room temperature.
• This device belongs to protection class I. Therefore, it is im-
perative that the green/yellow wire is connected to the earth
contact of the plug. The electrical connection must be made by
a qualified person.
• Make sure that the cable has never been squeezed or damaged
by sharp objects. Check the device and the cables regularly.
• If the cable is damaged, it must be replaced immediately by the
manufacturer, its service agent or a qualified person in order
to avoid danger.
• Lenses, glasses or UV filters must be replaced if they are visu-
ally damaged, or their effectiveness is impaired, e.g. by broken
glass or by deep scratches.
• Ensure that wires never come in contact with other wires!
Handle the power cord and all connections with caution!
• Make sure that the line voltage is not higher than the voltage
specified in this manual.
• Disconnect the unit from the AC mains when it is not in use or
when cleaning it. Disconnect the connection only by pulling
the cable plug.
• Using the fixture for the first time, can result in light smoke
and odors. This is a normal process and does not constitute a
defect.

RISK OF BURNS!

Do not touch the unit during operation! The housing may reach
high temperatures.
RISK TO HEALTH!
Never look directly into the light source. Especially epileptics
risk an epileptic shock! Disconnect the unit from the AC mains
when not in use or when cleaning it.
• Defects caused by modifications of the device by unqualified
handling or an unqualified person are not covered by the war-
ranty.
• Keep the product away from children and unskilled people.
• There are no wear parts in the device. Maintenance and service
must be performed only by an authorized service partner.

Designated Use

This product is a spotlight, which is designed only for professi-
onal use on stages, discotheques, theatres, etc. This product is
approved for mains connection up to 230 VAC and designed for
indoor use.
• Please avoid any kind of shocks and outer actions during its
installation or transportation.
• Take care of too high ambient temperature, humidity and dust
when choosing the installation location. Assure that all cables
are fixed. Incorrect operation may lead to danger.
• Image shows the minimum distance to illuminated ob-
jects. Minimum distance between fixture and illuminated sur-
face is 0,5 meters
• Assure that the area below the mounting position of the fix-
ture is roped in while mounting, dismantling and service.
• The spotlight itself and its accessories like color frame and bar-
ndoors have to be safed with a suitable safety chain.
• Assure that the maximum ambient temperature is never excee-
ded.
• Do not put the fixture in operation before you are familiar
with its functions. Keep the product away from children and
unskilled people.
13