Tape Operations; Listening To A Cassette - JVC KS-FX922R Bedienungsanleitung

TAPE OPERATIONS

Listening to a cassette

1
Open the control panel.
2
Insert a cassette into the cassette
compartment.
3
Close the control panel by hand.
4
Select the tape direction.
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, select tape as the source by
pressing TAPE 23 to start tape play.
16
DISP
TP
RDS
PTY
7 8
The unit turns on and
tape play starts
automatically.
TAPE indicator appears.
Each time you press TAPE 23,
the tape direction changes
alternately forward (
and reverse (
9 10 11 12
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The source
changes to the previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can eject the cassette while the unit is turned
off by pressing 0.
To fast-forward and rewind a tape
To stop fast forward and rewind at any
position on the tape, press TAPE 23.
Tape play starts from that position on the tape.
Notes:
)
• When one side of the tape reaches its end during
).
play, the other side of the tape automatically starts
playing. (Auto Reverse)
• When the tape reaches its end while fast-forwarding,
the tape direction will be changed automatically.
DAB
MO
Press ¢
for more than
1 second to fast-forward the tape.
When the tape reaches its end,
the tape is reversed and playback
starts from the beginning of the
other side.
Press 4
for more than
1 second to rewind the tape.
When the tape reaches its end,
playback of the same side starts.