Santec VTC-HDH322PWD Bedienungsanleitung Seite 37

Bedienungsanleitung / User Manual VTC-HDH322PWD
L/L Sync (LineLock Synchronsation):
INT: internal synchronisation
LL: LineLock synchronisation
Note: If you use 12 V DC, synchronisation iss et to „internal". If you use 24 V AC, you
can also use LineLock synchronsation.
Monitor type:
Change the settings according to your monitor. LCD/CRT monitors can be used.
Factory Reset:
Return to factory settings.
Communication: Not supported!

Protocols: Pelco-D is supported by default.

Camera ID:

Baud rate:

Save/reboot: Save the set values and reboot the camera.

Previous:
Exit:
Save the current settings and return to main menu.
_________________________________________________________________________________

Camera ID can be set to 0-255.
Baud rate can be set to 4800-57600.
Return to main menu.
- 37 -