Santec VTC-HDH322PWD Bedienungsanleitung Seite 27

Bedienungsanleitung / User Manual VTC-HDH322PWD
5. Adjustments
Lens adjustment: (picture 4)
Lens control (focal length and focus) is done by the two setting rings.
Carefully loosen the two safety screws a bit so that you are able to turn the setting rings.
Adjust the lens according to your needs. Finally, seize the two safety screws again carefully.
OSD adjustment:
The camera adjustments are done by an OSD (on-screen-display) menu. On the camera you
will find a mini-joystick. Press onto this joystick and a menu pops up in the video picture. You
can now move the joystick left/right/up/down in order to get to the desired menu item. For
confirming your choice, press onto the joystick.
See chapter "Camera adjustments via OSD menu" for further details.
Additional video connection: (picture 3)
This additional video connector can be used with the included adapter, e.g. if you want to
install a monitor during the installation phase in case the regular video cable has already
been laid.
_________________________________________________________________________________
- 27 -