DETOMASO COMPASSO Bedienungsanleitung Seite 24

EN
Function
Binary LED time display with hours and minutes.
Binary LED date display.
Display of time and date
Press button A or B to display the time.
While time is displayed press button B to display the date.
Press once more to display the time again.
In order to figure out the hour, minute, month or date, please add the
digits above the illuminated LEDs.After 5 seconds without input the display
will stop automatically.
Setting the time
Press button A for 3 seconds when you are in the time display setting.
The LEDs for the hour will flash. Press button B to set the hour. Press
button A to switch to the minute display and set with button B.
Setting the date
Press button A and B in sequence and then hold button A for 3 seconds.
The LEDs for the month will flash. Press button B to set the month. Press
button A to switch to the date display and set with button B.
24