Pioneer AVHP6600DVD Installationsanleitung Seite 5

Jack for Wired Remote Control
Please see the Instruction Manual for the
Wired Remote Control (sold separately).
Antenna cable (supplied)
1.5 m
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Connection method
1. Clamp the lead.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
2 m
Antenna jack
Black
21 pin cable (supplied)
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Violet
2. Clamp firmly with
needle-nosed
pliers.
Power supply side
Ground side
Hide-away unit
26 pin cable (supplied)
Parking brake
switch
Fig. 2
4