Herunterladen Inhalt Inhalt Diese Seite drucken

When Connecting To Separately Sold Power Amp - Pioneer AVHP6600DVD Installationsanleitung

Vorschau ausblenden Andere Handbücher für AVHP6600DVD:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 30
Connecting the Units

When connecting to separately sold power amp

This product
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
5
Blue/white (6*)
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
23 cm
Rear output
(REAR OUTPUT)
15 cm
Front output
(FRONT OUTPUT)
15 cm
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
When you connect separately sold
multi-channel processor (e.g. DEQ-P6600)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
Note:
When you connect multi-channel processor to
this unit, separately sold power amp must be
connected to multi-channel processor.
Note:
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis