Programmed Recording With Epg (Electronic Programme Guide); Pvr Playback; Time Shift Function - AEG CTV 2402 Bedienungsanleitung

9.4 Programmed Recording with EPG (Electronic Programme Guide)

1. Press the EPG button to access the electronic programme guide.
2. Press the arrow buttons to select the desired channel and/or programme.
3. Press the REPEAT button. The recorder window is displayed.
4. Press ENTER to confirm the entered times.
Programming is finished and the dates are shown in the Recorder Schedule List.

9.5 PVR Playback

1. Press the INDEX button to display your recordings.
2. Repeatedly press the INDEX button to sort the recordings by Programme, Channel, Time.
3. Press / to select the desired recording.
4. Press to start playback.
5. Press STOP to end playback.
NOTE:
Press the T.SHIFT button to pause playback ( see "9.6 Time Shift Function" on page 63).

9.6 Time Shift Function

The time shift function allows you to interrupt a programme and to continue viewing it later. A USB device with suffi-
cient capacity must be connected. Time shift size list set after formatting ( see "9.1 PVR Settings" on page 61).
1. Press the T.SHIFT button. The image is "frozen". On the bottom of the screen the elapsed time is displayed.
2. Press to activate time shift playback.
NOTE:
Press EXIT to hide the info bar. The time shift logo is displayed bottom left on the screen.
3. Press / to skip forward and back in the time window.
4. Press / to activate the search.
5. Press T.SHIFT to pause playback again.
Press STOP to exit the function.
A-B Repeat
In time shift mode you can define a section to be automatically repeated. This is indicated with the letters A and B below
the playback icon.
1. In time shift playback mode press
2. Press again to mark the end point of the section to be repeated. The marked section is now repeated.
Press the STOP button to stop repeat mode.
once to mark the starting point of the section to be repeated.
ENGLISH
63