Programmed Recording With Epg (Electronic Programme Guide); Pvr Playback; Time Shift Function - AEG CTV 3204 LED Bedienungsanleitung

NOTE:
Press REC/REP again to hide the info bar. The REC button remains top left on screen.
3. Press the button to finish recording.
NOTE:
• Press the II button to pause the current recording. ( see "9.5 Time Shift Function" on page 39)
Record a programme and watch another at the same time
During PVR recording you can switch to another programme of the same channel. In doing so, you will not interrupt the
recording.
If the programme is broadcast on a different channel, a warning message appears on the screen.
The programmes which are broadcast on a channel depend on the coverage area. Information on channels that are
broadcast in your coverage area can be found at www.überallfernsehen.de or at your specialist dealer.

9.3 Programmed Recording with EPG (Electronic Programme Guide)

1. Press the EPG button to access the electronic programme guide.
2. Press INDEX and press / to select CHANNEL (1).
3. In CHANNEL (2) press / to select the channel.
4. Press / to select the desired programme.
5. Press the red button. The recorder window is displayed.
6. Press OK to confirm the entered times.
7. Programming is finished and the dates are shown in the Overview.
8. Press EXIT to close the window.
NOTE:
• During recording the info bar is displayed. Press REC/REP to hide the info bar. The REC button top left on screen
remains.
• Important: The device does not automatically turn off after the recording is finished.
Different Programme Modes
To change the recording mode of the programming via EPG, select the bottom line in the Timer window. Here, select
between the following modes:
Auto: The preset times of the station are saved.
Once: If necessary, you can change the preset start and end times.
Daily: The programme is recorded daily.
Weekly: The programme is recorded again on the same day of the week.

9.4 PVR Playback

1. Press the INDEX button to display your recordings.
2. Repeatedly press the INDEX button to sort the recordings by Programme, Channel, Time.
3. Press / to select the desired recording.
4. Press (19) to start playback.
5. Press to end playback.
NOTE:
• During playback the info bar is displayed. Press to hide the info bar. The PLAY button top left on screen remains.
• Press the II button to pause playback ( see "9.5 Time Shift Function" on page 39)

9.5 Time Shift Function

The time shift function allows you to interrupt a programme and to continue viewing it later. A USB device with sufficient
capacity must be connected. Time shift size list set after formatting ( see "9.1 PVR Settings" on page 38).
English
39