Basic Operation; Turn Tv Set On/Off; Select Channel; Adjust Volume - AEG CTV 2402 Bedienungsanleitung

• Connect the device via full-featured SCART cable to the SCART connector.
• In the source menu (press SOURCE button) select SCART.
VIDEO Connectors
Connect for instance a video camera via RCA connectors LIN, RIN and VIDEO.
• Connect the device via RCA cable to VIDEO, LIN and RIN connectors.
IMPORTANT! Observe the colour coding of the cables when using AV cable (video = yellow, audio L = white and audio R = red).
• In the source menu (press SOURCE button) select AV.
PC Connector
• Use a VGA cable to connect the monitor connector of the PC with the VGA connector on the TV set.
• Use an audio cable to connect the audio connector of the PC with PC AUDIO IN on the TV set.
• In the source menu (press SOURCE button) select PC.
Component Connector
The component connector Y Pb Pr transmits analogue image signals of external devices, e.g. AV receiver or DVD recorder
in very good quality.
• Use a component cable (purchase separately at your dealer) with 3 RCA connectors to connect component output of
the external device with the inputs Y Pb Pr on the TV set.
• Use an audio cable to connect the audio output of the external device with the audio connectors LIN and RIN on the
TV set.
• In the source menu (press SOURCE button) select COMPONENT.
HDMI Connector
The HDMI connector transmits digital image and sound signals of external devices in very good quality.
• Use an HDMI cable (purchase separately at your dealer) to connect the HDMI connector of the external device with
the HDMI connector on your TV set.
• In the source menu (press SOURCE button) select HDMI.

6. Basic Operation

All settings can be performed comfortably with the remote control and the OSD menu. The basic functions can also be
performed with the buttons on the TV set. In this user manual we generally describe operation with remote control.

6.1 Turn TV Set On/Off

• To turn the TV set on toggle the main switch at the bottom right. It starts in the previously selected mode and selected
source. In standby mode (status indicator red) press the POWER
turns blue and the TV set turns on.
• Perss the POWER button on the remote control to turn the device off again (standby mode).
• To turn the TV set completely off toggle the main switch at the bottom right.
NOTE:
Turn the TV set off completely if you are not using it, as it uses a small amount of power in standby mode. Even after
turning the device off with the main switch it is not completely disconnected from mains power supply. For this you
must disconnect the power plug from the wall outlet.

6.2 Select Channel

• Press the CH / buttons or numeric buttons 0-9 to select the desired channel.
• Press the button on the remote control to return to the previous channel.
• Press -/- - to display the channel list. Press the arrow buttons (
display the channel on screen.

6.3 Adjust Volume

• Press the VOL / , buttons to adjust the volume.
button on the remote control. The status indicator
) to highlight a channel and press ENTER to
ENGLISH
57