On Time And Off Time; Sleep Timer; Auto Sleep; Time Zone - AEG CTV 2402 Bedienungsanleitung

13.2 On Time and Off Time

On Time and Off Time define the time when the TV set turns on and off. You can define different periods.
NOTE:
These functions turn your TV set on from standby mode or into standby mode. If your TV set is turned off with the main
switch this functions is invalid.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
3. Press the arrow button
4. Press ENTER to access the function.
5. Press the arrow buttons to highlight and change the displayed
functions.
Off Time:
- Repeat: Define if the setting is to be performed once or regu-
larly. Select between: (Off, Once, Daily, Mon-Fri, Mon-Sat, Sat-
Sun or Sun).
- Hour / Minute: Set the off time.
On Time:
- Activate: Define if the setting is to be performed once or regularly. Select between: (Off, Once, Daily, Mon-Fri,
Mon-Sat, Sat-Sun or Sun).
- Hour / Minute: Set the on time.
- Volume: Set the volume that the TV set turns on with.
- Mode: DTV - if DVBT antenna is connected / ATV – if external antenna or cable tuner is connected / RADIO if avail-
able the TV set can turn on with a radio station.
- Num: Set the cahnnel number that the TV set turns on with.
6. Press EXIT to exit the menu or press MENU to return to the previous menu. The changes are saved.

13.3 Sleep Timer

You can set your TV set to automatically turn off after a preset period of time. The sleep timer is deleted and must be set
again if you turn the TV set off during sleep timer setting. Set the sleep timer interval between Off and 240Min.
• Repeatedly press the SLEEP button on the remote control until the desired time is displayed. The menu disappears
after a few seconds and the TV set turns off after the preset interval.
NOTE: You can also perform this setting in the TIME menu.

13.4 Auto Sleep

With auto sleep activated the TV set automatically turns into standby mode after not receiving a signal for 10 minutes.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
3. Press the arrow button
4. Press to activate or deactivate the function.
5. Press EXIT to exit the menu and save the changes.

13.5 Time Zone

1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
3. Press the arrow button
4. Press the arrow buttons / to select the desired time zone.
5. Press EXIT to exit the menu and save the changes.
until the menu TIME is activated.
to highlight Off Time or On Time.
until the menu TIME is activated.
to highlight Auto Sleep.
until the menu TIME is activated.
to highlight Time Zone.
ENGLISH
67