Teletext; Special Functions; Lock - AEG CTV 2402 Bedienungsanleitung

ENGLISH
68

14. Teletext

Teletext is a free information service of the broadcaster. It is transmitted with the TV signal and needs no further equip-
ment. Not all stations offer Teletext. Teletext information is generally divided into areas, themes and pages. Some themes
cover several pages (2/3 page two of three), others contain hidden information (quiz answers, VPS times, etc.).
Teletext On / Mix Mode / Off
Press the TEXT button on the remote control to cycle through the Teletext functions
- turn on,
- activate mix mode with the TV image behind the Teletext display and
- turn off.
Colour Buttons
Nearly all Teletext pages feature coloured text fields at the bottom of the screen (red, green, yellow, blue). Press the
colour buttons on the remote control to access the themes/pages directly, which are displayed in the coloured fields.
Access Pages with Numeric Buttons
The current 3-digit page number is displayed in the rop left corner on screen. The page numbers are always entered with
3 digits with the numeric buttons. It takes a few seconds until the page is displayed.
Access Subpages
1. Select the desired Teletext page (with subpages).
2. Press the arrow buttons / to select the subpage. The number of subpages for the current Teletext page is displayed
at the bottom of the screen.
Hold Function
Press the HOLD button to pause and continue the automatic access of subpages.
Display Size
• Press the SIZE button to change the Teletext font size and to toggle in large font mode between top and bottom half
of the page.
Hidden Information
Teletext pages with games or riddles often contain the hidden answers.
• Press the REVEAL button to display the answer. Not all broadcasters support this function.
Access Index Page (ATV only)
• Press the INDEX button to display the index page (generally page 100).

15. Special Functions

15.1 Lock

This menu allows you to set different locks and to change the Password. Enter the preset password 0000 to open the menu.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button
3. Press ENTER to open the function.
4. Enter the password (preset 0000).
5. This procedure must be repeated every time the menu is accessed.
until the menu LOCK is activated.