Usb Mode; Display Ci Information (Only Encrypted (Pay Tv) Dvb-T Channels); Set Picture And Sound; Change Picture Settings - AEG CTV 2402 Bedienungsanleitung

ENGLISH
64

10. USB Mode

• Connect your USB device directly at the USB port at the rear of the unit.
• Press the SOURCE button and select USB. The USB menu is displayed.
1: Status window
2: Directory window
3: File window
4: Preview window
5: Information window
• Press / to select the playback mode and press ENTER to confirm. The currently selected playback mode is high-
lighted.
NOTE:
• Press EXIT to return to playback selection mode.
• In photo and movie playback mode press
• Press the blue button to turn the TV screen off.
• For further operation observe the instructions at the bottom of the screen.
• Press / to skip to the next/previous file.
• Music files: Press / to search within the file forward or back. Press
• Press the STOP button to stop playback.

11. Display CI Information (Only Encrypted (Pay TV) DVB-T Channels)

1. Press the MENU button to display the OSD main menu.
2. Press to select CI Information and press ENTER.
If a CI module and smart card are connected the information is displayed.
NOTE:
Encrypted DVB-T channels are not available in all areas. Ask your programme provider or dealer for further information.

12. Set Picture and Sound

12.1 Change Picture Settings

Your TV set comes with 3 preset and one manually adjustable picture settings (Standard, Mild, User and Dynamic). Press
the PMODE button to cycle through the options. Select User to access your user-defined picture settings.
Shows current playback mode.
Shows path.
Show files in current path.
Photo preview window.
Shows information about current file.
to show image/movie in full screen mode.
to return to normal playback mode.