Direct Pvr Recording (Manual); Programmed Pvr Recordings - AEG CTV 2402 Bedienungsanleitung

ENGLISH
62
NOTE: This can take several minutes according to disk capacity.
Now select the Time Shift Size.
• Press / to select the desired Time Shift Size (size between 512MB....All).
NOTE:
Selecting ALL for the time shift function uses the maximum disk capacity, and for further recordings is no capacity left.
• Max. Record Time
Press the arrow button , to select the recording time between 1 and 6 hours.

9.2 Direct PVR Recording (Manual)

1. In DTV mode select the programme to be recorded.
2. Press the REPEAT button. The info bar is displayed.
The recording time is displayed left below the REC button. On the right the remaining recording time is displayed.
NOTE:
Press the REPEAT button again to minimize the info bar. This leaves a flashing button bottom right on the screen.
3. Press the STOP button to finish recording.
NOTE:
• In recording mode you can press POWER
standby indicator flashes.
• Press the T.SHIFT button to pause the current recording ( see "9.6 Time Shift Function" on page 63)

9.3 Programmed PVR Recordings

1. In DTV mode select the channel to be programmed.
2. Press the MENU button to display the OSD main menu.
3. In the main menu select CHANNEL, press
press the arrow button .
4. Enter the recording parameters:
Programme: (displays current programme)
Mode:
Auto (immediate recording), Once, Daily, Weekly
Start Date: Press the arrow button
with / .
Start Time:
Enter the desired start time. Then select "close" and press
ENTER to confirm.
End Date: Press the arrow button
date.
End Time: Enter the end time. Then select "close" and press ENTER to confirm.
5. Press ENTER again to save the entered recording data. Now the recorder schedule list is displayed, in which all pro-
grammed programmes are displayed.
NOTE:
In the Recorder Schedule List individual programmes can be deleted with the red button.
• To review alle scheduled programmes select in the main menu CHANNEL, press the arrow button
Schedule List and press the arrow button .
to set the device to sleep mode. The recording continues and the
to select Recorder Mode and
and enter the desired start date
and enter / the desired end
to select Recorder