Siemens TK 64 Serie Gebrauchsanleitung Seite 45

TURN ON
COFFEE
UNIT DE-
SCALING
EMPTY
TRAYS
ADD
WATER
TURN ON
WATER
UNIT DE-
SCALING
TURN ON
COFFEE
UNIT DE-
SCALING
EMPTY CLEAN
TRAYS CONTACTS
UNIT IS
RINSING
COFFEE
Draining hot water
SYSTEM
TOO HOT
44
q Set function selector 2 to
Note: The appliance is automatically descaled. Descaling
solution flows at intervals into the tray 24. Wait for the next
display on display 3 (approx. 10 minutes).
q Empty and re insert tray 24 and coffee dregs tray 23.
q Rinse out the water tank 22, fill to the max mark with
fresh water, and re insert the tank.
q Empty the receptacle and place back under the
nozzle 13.
q Set function selector 2 to 0.
Note: The appliance is automatically rinsed. Water flows
at intervals into the receptacle. Wait for the next display on
display 3 (approx. 4 minutes).
q Set function selector 2 to
Note: The appliance is automatically rinsed. Water flows at
intervals into the tray 24. Wait for the next display on display
3 (approx. 4 minutes).
q Empty tray 24 and coffee dregs tray 23.
q Clean and dry contacts 26.
q Re insert tray 24 and coffee dregs tray 23.
q Wipe splashes off the nozzle 13 and appliance.
Note: The appliance is automatically rinsed.
The descaling process is complete. The illuminated ring on
4 descaling 9 goes out. The appliance is ready for use
again.
The descaling programme requires a specific water
temperature before it can start. If the water temperature
is too high, drain hot water first!
q Place a suitable receptacle under the nozzle 13.
q Set function selector 2 to 0.
Water runs into the receptacle.
q Set function selector 2 to
The required temperature has been reached. The descaling
process can start.
z
.
z
.
z
.