Temperature; Current Time; Timer - Siemens TK 64 Serie Gebrauchsanleitung

Temperature

Ä Ä Ä Ä Ä Ä Ä Ä Ä
TEMP.
Ä Ä Ä Ä Ä Ä Ä Ä Ä
normal
Ä Ä Ä Ä Ä Ä Ä Ä Ä
TEMP.
high
Ä Ä Ä Ä Ä Ä Ä Ä Ä
TEMP.
Ä Ä Ä Ä Ä Ä Ä Ä Ä
MAXIMUM
Ä Ä Ä Ä Ä Ä Ä Ä Ä

Current time

TIME
--:--
Ä Ä Ä Ä Ä Ä Ä Ä Ä
TIME
Ä Ä Ä Ä Ä Ä Ä Ä Ä
14:39
Ä Ä Ä Ä Ä Ä Ä Ä Ä

Timer

ON AT
--:--
ON AT
Ä Ä Ä Ä Ä Ä Ä Ä Ä
07:45
Ä Ä Ä Ä Ä Ä Ä Ä Ä
The coffee temperature can be set with this function.
q Hold down button
q Select TEMP. with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the & button. Back to standby.
The current time is programmed with this function. This is
required when using the timer function.
q Hold down button
q Select TIME with < or >.
%
q Press button
q Change the setting with < or>.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the & button. Back to standby.
The set time will be deleted
- if the mains plug is pulled out,
- if the appliance is switched off with the mains switch 1,
- if there is a power failure.
The current time must be input again.
This function is used to set the time at which the appliance
automatically switches on.
q Hold down button
q Select ON AT with < or>.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the & button. Back to standby.
De activating the setting:
q Set the time to --:-- with < or> .
Note: The current time must be set for this function to run.
The switch on time is retained even if there is a power
i
failure or the mains switch 1 is actuated.
%
on display 3 for at least 3 seconds.
until the display flashes.
to save the setting.
%
on display 3 for at least 3 seconds.
- hours display flashes.
- minutes display flashes.
to save the setting.
%
on display 3 for at least 3 seconds.
, hours display flashes.
, minutes display flashes.
to save the setting.
37