Inhaltsverzeichnis
Werbung
Using ground
espresso/coffee
powder
Preparing hot water
Steam for heating
drinks
q Select the desired amount with the rotary knob
-
/
-
8
(
(
q Place cup(s) under the outlet 12. If required, adjust the
height of the outlet 12.
q Open the right cover of the appliance 18 and the cover
on the ground coffee duct 16.
q Add one to two level scoops of medium fine ground
coffee to the ground coffee duct 16.
Warning!
Do not add whole beans or instant coffee!
Add a maximum two scoops of coffee.
q Close the cover on the ground coffee duct 16 and the
right cover of the appliance 18.
q Press the 2 button 5.
Repeat the process for another cup of preground coffee.
i
Note: If coffee is not brewed within 90 seconds, the brewing
chamber is emptied automatically in order to prevent
overfilling. The appliance is rinsed.
q Close inlet valve 13/b with rotary knob 13/a.
q Place an appropriate cup under the nozzle 13.
q Rotate function selector 2 to 0 and fill the cup.
d
Risk of scalding!
When the function selector is set to 0, the nozzle may
spurt slightly.
Escaping steam is very hot.
Do not touch nozzle 13 or direct at people.
q End the process by rotating the function selector 2
z
back to
.
q Close inlet valve 13/b with rotary knob 13/a.
q Immerse nozzle 13 deep into the liquid which
is to be heated.
q Slowly rotate function selector 2 to =.
The appliance now heats up for approx. seconds.
Then the liquid is heated.
d
Risk of scalding!
When the function selector is set to =, the nozzle may
spurt slightly.
Escaping steam is very hot.
Do not touch nozzle 13 or direct at people.
q End the process by rotating the function selector 2
z
back to
.
Note: When nozzle 13 has cooled down, clean immediately.
Dried residue is difficult to remove.
8
6.
33
Werbung
Kapitel
Inhaltsverzeichnis
