Cleaning The Nozzle - Siemens TK 64 Serie Gebrauchsanleitung

Cleaning the nozzle

42
Warning
Clean the nozzle 13 after each use.
q Immerse the hose 13/d into a receptacle of warm water.
q Place an appropriate receptacle under the nozzle 13.
q Open the inlet valve 13/b with rotary knob 13/a.
q Briefly set function selector 2 to =.
d
Risk of scalding!
When the function selector is set to =, the nozzle may
spurt slightly.
Escaping steam is very hot.
Do not touch nozzle 13 or direct at people.
q Set function selector 2 to
q Wipe the outside of the nozzle 13 after it has cooled
down.
q Dismantle the nozzle 13 to clean thoroughly.
z
.