Temperature Control; Operational Parameters - Pkm KG 218.4 A++ Bedienungsanleitung

AFTER INSTALLATION WAIT 4-6 HOURS
BEFORE YOU CONNECT YOUR APPLIANCE TO THE MAINS!

4.2 Temperature control

0/OFF/AUS Switches off the compressor.
1 Warmest cooling temperature.
3/4 Standard setting for daily use.
7 Coldest cooling temperature.
1. Before initial use: Clean the appliance. Read the information given in chapter
CLEANING AND MAINTENANCE
ventilated properly.
2. When the appliance has been disconnected from the mains or switched off or in
case of a power failure, you must wait 3 to 5 minutes before restarting the
appliance.
3. The description of the setting levels represents standard values only.
4. You can check the cooling/freezing temperature using a fridge/freezer
thermometer (not included in delivery).
5. The setting definitions are standard values only.
WARNING The setting 0/OFF switches off the compressor only. You
must unplug the appliance to disconnect it from the mains.

4.3 Operational parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. When the ambient temperature is very high, it is recommended to set the
thermostat to a colder setting if needed. If the colder setting should cause strong
formation of encrusted ice, please select a lower setting.
3. High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep the temperature
constant inside the appliance.
4. Defrost the appliance periodically as encrusted ice will decrease the power and
increase the energy consumption of the appliance.
. Check that the appliance is levelled and
31