Christopeit Sport TM II Spirit Montageanleitung Und Bedienungsanleitung Seite 21

USER MANUAL OF COMPUTER
Function of Displays:
Pulse-Display:
Shows actually heart rate data.
Speed-Display:
Shows actually speed in km/h.
Distance-Display:
Shows actually distance in KM.
Time-Display:
Shows actually time of exercising in minutes and seconds.
Calories-Display:
Shows actually calories in kcal.
Program-No. Display:
Shows actually exercise programs P1~P25.
Program-profile Display:
Shows the exercise profile of exercise programs P1~P25.
Incline % Display:
Shows actually inclination of 0-12%.
Function of keys:
F-key:
PROGRAM key: On the stop status, press F-key to select exer-
cising speed programs -P1-P25-
E/L-key:
Select key of time-program, distance program or calories pro-
gram. Pressing this key after program stop deletes all settings.
Start/Stop: Press Start/Stop-key to start exercise program (motor
starts running) and press Start/Stop-key during exercising stops
program (running motor will slow stop).
"+"-key:
Press speed up key increase settings or motor speed. This key
function is also on the pulse grips.
"-"-key:
Press speed down key decrease settings or motor speed. This key
function is also on the pulse grips.
"+"- incline key:
Press incline up key increase inclination. This key function is also
on the pulse grips.
"-"- incline key:
Press speed down key decrease inclination. This key function is
also on the pulse grips.
Quick Speed- keys 3, 6, 9 km/h:
Press one of these keys and the speed changes direct into 3, 6,
9 km/h
Incline - keys 3, 6 and 9 (%):
Press one of these keys and the inclination changes direct into
3%, 6% or 9%.
MANUAL MODE:
How to start manual mode:
Put in the AC plug in wall power 230V~50Hz and put on the power
switch (17).
Put safety clip (59) onto the computer and it will show normal ma-
nual mode.
Stand your feet on both side rails.
Put the safety key at you exercise cloth and press start/stop-key
to start with exercising. After a 5 sec. count down, the motor begin
to run slowly and you can step on the running belt and follow the
speed. Adjust the speed with "+" and "-" -keys into desired speed.
If put off the safety clip from computer at any time, the motor stop
slowly and the display will show E0. After put on the safety key on
computer the normal manually program will show.
Press "+" or "-" -key to adjust value of speed.
Press quick speed -key to adjust speed quickly.
All values of the displays will counter up.
Setting Programs Time-Distance-Calories:
Time Program:
On the normal manual mode, press E/L-key, to enter time program
The time display will flash and the initial value is 20:00. Press "+"-
key or "-"-key to set value. The range is: 8:00-99:00. If set a value
the display counts up till zero and then stops running motor.
Distance-Program:
On the normal manual mode, press E/L-key, to enter distance pro-
gram The distance display will flash and the initial value is 5,00KM.
Press "+"-key or "-"-key to set value. The range is: 1,00-99:00KM.
If set a value the display counts up till zero and then stops running
motor.
Calories-Program:
On the normal manual mode, press E/L-key, to enter calories pro-
gram. The calories display will flash and the initial value is 500kcal.
Press "+"-key or "-"-key to set value. The range is: 10-990kcal. If
set a value the display counts up till zero and then stops running
motor.
RANGE OF ALL FUNCTIONS:
INITAL
TIME(MIN:SEC) 0:00
SPEED(KM/H) 0.0
DISTANCE(KM) 0.00
PULSE(BPM) P
CALORIES(KCAL) 0
Exercise programs P1-P25:
On the normal manual mode, press F-key to chose one of the ex-
ercise speed programs P1-P25. Each program is divided into 10
intervals of time and the speed changes as following program list
shows. Initial setting time is 20mins, set a time for training session
and press Start/Stop to start the program. Pressing Start/Stop
again to have a break or finish earlier the program. Press speed
"+" or "-"-key to adjust speed during the program if it is to quick or
slow. With next intervals of time the speed level will change back
to program mode.
If the program runs till end of time the motor will stop running after
the display counts down time to zero.
21
INITIAL SETTING DISPLAY
VALUE RANGE RANGE
20:00 8:00-99:00 0:00-99:59
N/A N/A 1.0-16.0
5.00 1.00-99.00 0.00-99.99
N/A N/A 40-199
500 10-990 0-999