Assembly Instructions With Exploded Diagrams - Christopeit Sport TM1 Montageanleitung Und Bedienungsanleitung

Assembly Instructions
Before beginning assembly, be sure to observe our recom-
mendations and safety instructions.
Step 1:
Installation of the left support (48L) and the right support (48R)
on the foot (2) with the screws M8x80 (60), screws M8x60 (63),
screws M14x90 (62), washers 8//16 (59), washers 14//22 (58)
and washers 8//20 (65).
1. Place the screws (60+62+63) and the washers (58+59+65) ac-
cessibly beside the foot (2).
2. Place the left support (48L) at the foot so that the hole patterns
in the foot are aligned. (Note: The transport rollers (34) pre-as-
sembled in the foot (2) must point backwards (opposite to the line
of sight when standing on the machine during training. Right and
left are specified as viewed standing on the machine during trai-
ning.)
3. Push one screw (60+62) through each hole and tighten the left
support (48L) at foot (2) firmly.
4.Connect the plugs of computer cables (53) and proceed as de-
scribed in 1. – 4. with the right support (48R) on the right hand
side of the foot (2).
5. Screw the connection tube (47) at support left and right
(48L+48R) tightly, by using screw (63) and washer (65).
Step 2:
Installation of the handrail connection tube (55) with handle
bar (46) At support Left + right (48) with screws M8x15 (64) and
washers 8//16 (59).
1. Place on each screw (64) one washer (59) and put them acces-
sibly beside the foot (2).
2. Put the plugs of computer cable (53) and hand pulse cable (54)
together.
3. Place the handle bars (46) with handrail connection tube (55)
onto the ends of support left and right (48L+48R) and tighten them
firmly by using the screws (64) with washer (57). (Observe that the
cable won't squeeze.)
Step 3:
Installation of the base of computer (50) at handrail connec-
tion tube (55) with the screws M8x15 (64) and curved washers
8//20 (57).
1. Place on each screw (64) one washer (57) and put them acces-
sibly in front of the foot (2).
2. Place the base of computer (50) against the handrail connection
tube (55) and tight it firmly by using the screws (64) with washer
(57).
16