Customer Service - Siemens KI..L serie Gebrauchsanleitung

Fault
Possible cause
Temperature selector has
been set to a higher
setting.
The ambient temperature
The frozen food
is thawing.* is colder than +16 °C.
The refrigerating unit
is starting less frequently.
The temperature selector
Refrigerator has
is on 0".
no cooling capacity. no cooling capacity.
Power failure; the fuse
has been switched off;
the mains plug has not
been inserted properly.

Customer service

Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
*only for appliances with a freezer compartment
Remedial action
Set the temperature selector to a lower
setting.
Increase the ambient temperature above
+16 °C.
If appliances feature an ambient
temperature switch, switch on.
To switch on, press the switch,
Fig. 2/1, mark 0" is no longer visible.
The light inside the appliance glows
at a reduced luminosity.
Rotate the temperature selector from
position 0".
Check whether the power is on, check
the fuses.
These numbers can be found on the
rating plate. Fig. 8
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
en
27