AEG Electrolux S74270KA8 Benutzerinformation Seite 27

and remount them on the other
side.
5. Refit the door.
6. Refit bottom hinge (E) on the
opposite side, using the two
screws previously removed.
7. Remove blanking cover (F) from
ventilation grille (D) by pushing it
in the direction of the arrow and
refit it on the opposite side.
8. Refit ventilation grille (D), clip-
ping it into place.
9. Unscrew the handle. Refit it on
opposite side after having pierced
the plugs with a punch. Cover the
holes left open with the plugs
contained in the documentation
pack.
Attention:
After having reversed the ope-
ning direction of the doors check
that all the screws are
properly tightened and that the
magnetic seal adheres to the
cabinet. If the ambient temperature
is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. in that
case, wait for the natural fitting of the gasket or accelerate this process by
heating up the part involved with a normal hairdrier.
G
27