Front Panel - Pioneer X-HM11-K Bedienungsanleitung

02 Part names and functions

Front panel

1 STANDBY/ON button
1
Switches the receiver between standby and on (page 12).
2 Remote sensor
Receives the signals from the remote control.
3 TIMER indicator
Lights when the unit power is off but when the timer setting is
activated.
4 Character display
See Display on page 9.
5 Volume control
Use to set the listening volume (page 12).
6 INPUT button
Selects the input source.
7 Headphone socket
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers
(page 14).
8 AUDIO IN socket
Use to connect an auxiliary component using a stereo
minijack cable (page 26).
8
En
1 2 3
 STANDBY/ON
TIMER
INPUT
PHONES AUDIO IN
6 7 8 9
4
   
10 11
9 USB terminal (X-HM21)
Use to connect your USB mass storage device or Apple iPod/
iPhone/iPad as an audio source (page 21).
USB terminal (X-HM11)
Use to connect your USB mass storage device as an audio
source (page 21).
10 Disc tray
Place the disc, label side up (page 17).
11 Playback control buttons
Select the desired track or file to be played back. Stop current
playback. Stop playback or resume playback from the point
where it was paused.
12 Disc tray open/close button
Use to open or close the disc tray (page 17).
5
VOLUME

X-HM21
12
X-HM21