Resetting The Device In Case Of Malfunction - Medion LIFE P85035 Bedienungsanleitung

 Mains adapter: Connect the connector plug on the supplied mains adapter to
the DC IN port and plug the power cable into a 230 V ~ 50 Hz socket.
 LINE OUT: Connect an audio cinch cable to the LINE OUT socket to transfer the
stereo sound output of the Internet radio to other audio devices.
 AUX IN: Connect a 3.5 mm stereo jack to the AUX IN socket to play back stereo
sound output from other audio devices via the Internet radio.
 USB: Connect a USB storage medium here to play back the audio files on the
storage medium on the Internet radio.

5.4. Resetting the device in case of malfunction

If the device fails to react, switch it off using the power switch at the back and then
switch it on again after a few seconds.
Then reset the menu settings to the factory settings by accessing the menu SYS-
TEM SYSTEM -> FACTORY RESET and confirming the prompt with YES.
You will have to repeat the installation process.
NOTE!
Please note that all settings, e.g. the network WEP key, will be irretrieva-
bly lost and will need to be input again after the device has been reset.
DE
FR
NL
EN
143 of 174