NOTE!
Before you can set an alarm, you need to set the clock
("11.1. Setting the time and date" on page 150).
Select an alarm clock and press the OK dial.
Select one of the following entries and press the OK dial to make the set-
tings:
Allow
Select OFF to deactivate the alarm.
Select DAILY, ONCE, WEEKENDS or WEEKDAYS to activate the alarm.
Time
Set the alarm time here.
Mode
Set the mode for the alarm clock here:
BUZZER: wake up to the alarm buzzer
INTERNET RADIO: wake up to the Internet radio
DAB RADIO: wake up to the DAB radio
FM: wake up to the FM radio
Preset
Select a station memory position if you selected either the Internet radio alarm
or FM/DAB radio alarm options.
Volume
Set the alarm volume here.
Save settings
To accept the above settings for the alarm clock, select the entry SAVE and
then turn the OK dial.
19. Playing audio signals from external devices
There is an audio input (AUX IN) at the back of the device.
Use a 3.5 mm audio cable to connect the AUX IN socket to the audio output of
an external device to play back the audio signal on the Internet radio.
Then select the AUX menu. You can also press the MODE button on the re-
mote control and then select the operating mode with the arrow buttons and
confirm with OK.
The audio signals from the external device are now played back via the loudspeak-
ers of the Internet radio.
166 of 174