Microphone Mute; Flash (R-Key) / Transfer A Call; Pre-Dial; Pause - TIPTEL 160 Bedienungsanleitung

Microphone mute

In talk mode, press
call will be ended.
To release the mute function press

Flash (R-key) / Transfer a call

This function is mainly for PBX systems. If you have call waiting service from your
network provider, it will also work for call waiting service.
a. Press R for call waiting service from your network provider.
b. Press R to transfer a call to another extension (within a PABX).
Note: Please, check flash timing in case of problems. PABX setting usually is 100
ms while network providers may use 100 ms or 300 ms. Please, ask your network
e provider or PBX installer (in case this device is used behind a PABX) for the
appropriate setting.
n
g

Pre-dial

In on-hook status, type in the phone number and then pick up the handset. The
number will be dialed automatically.

Pause

Press

Redial / Auto redial

In on-hook status, press
Pick up the handset or press
Auto Redial
In on-hook status, press AUTO /
continuously until the phone is answered.
and the call will be muted. If you hang up the handset the
/ P for a break off of 1.2/2.4/3.6 seconds (depending on setting).
/ P to review the last 16 dialed numbers.
Operation
again. Microphone will be switched on.
to dial the reviewed number.
to auto redial the last dialed number
14