Installation - TIPTEL 160 Bedienungsanleitung

Installation

1. Open the battery compartment cover, load 4 pieces of AA (UM3) batteries.
Rechargeable batteries are not charged within this device. Please, use
external charger (not supplied).
2. Connect one end of the coil cord to the jack of the handset, connect the other
end to the jack of the base unit.
3. Plug one end of the flat cable to the line jack of this phone, plug the other end
to the telephone wall socket.
e
n
g
Note:
1. Use only the following type and size of batteries: AA cell UM3 x 4 pcs.
The proper polarity or direction must be observed.
2. Please, change your batteries every 8 months or longer (depends on usage).
3. When replacing batteries, all batteries should be changed at the same time.
4. You have to pull out the line cord when replacing batteries.
5. The phone set works well with line power alone. Batteries are only needed for
the clock to function accurately.
Getting started
10