Set The Ring Melodies; Set The Ring Volume; Set Flash Time; Set Pause Time - TIPTEL 160 Bedienungsanleitung

Set the Ring Melodies

After set up the EXT. NO., press X/MENU to access the RING MELODIES setup.
Press

Set the Ring Volume

After set up the RING MELODIES, press X/MENU to access the RING VOLUME
setup. Press
confirm.

Set Flash Time

After set up the RING VOLUME, press X/MENU to enter the FLASH TIME setup.
Press
900ms) and press X/MENU to confirm. Please, ask your network provider or PBX
e
installer (in case this device is used behind a PBX) for the appropriate setting.
n
g

Set Pause Time

After set up the FLASH TIME, press X/MENU to enter the PAUSE TIME setup.
Press
confirm.
Dialing out the device will create a pause of the selected length after dialing the
digits stored in EXT. NO. (see: Set Ext. No.). This pause time will be used when
pressing P or using the telephone book accordingly.

Set DTMF or Pulse Mode

After set up the PAUSE TIME, press X/MENU to access the DTMF or PULSE
MODE setup. Press
X/MENU to confirm.
Please, ask your network provider or PBX installer (in case this device is used
behind a PBX) for the appropriate setting.
It is possible to temporarely switch from pulse to DTMF (tone dialing) mode during
a call pressing * .
to select the melody (1-16) and press X/MENU to confirm.
to select the ring volume (1-8) and press X/MENU to
to select the flash time(100ms, 200ms, 300ms, 400ms, 600ms,
to select the pause time(1.2s, 2.4s, 3.6s) and press X/MENU to
to select the mode(DTMF or PULSE) and press
Setup
12