Removing The Shelf Holders; Electrical Connection; Ventilation Requirements; Environmental Concerns - AEG SANTO K 9 12 05-6i Gebrauchsanweisung

Removing the shelf holders

Your appliance is equipped with shelf retainers
that make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for
this purpose. If the domestic power supply socket is not earthed, connect the appliance to
a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Directives.

Ventilation requirements

The airflow behind the appliance must be suffi-
cient.

Environmental concerns

The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
on the product or on its packaging indicates that this product may not be
Environmental concerns
A
B
C
min.
50 mm
200 cm
2
27
min.
200 cm
2