Technical Specifications - Lightmaxx LED BAR 8 SECTOR Bedienungsanleitung

PRODUCT CLEANING
A. Clean the output acrylic board and product body every 2 weeks, or smoke dust accumulation
will weaken the brightness of the light.
B. Use soft cloth with water to clean , do not with organic solvent ,such as ethyl alcohol
PRODUCT CLEANING
Product maintenance must consider the below terms.
A. All screws mounted on the lamp must reliably tightened, check and replace the corroded
screws.
B. Ensure fixed point for installation without any deformation
C. Check if the power cable is damage, and if the insulation layer is wear down.
D. To ensure good connection of the various parts of the circuit, and to avoid unnecessary
accidents coursed by bad electrical connections, the detailed inspection of the light must be
make by the authorized electrical engineer every three months.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Light Source:
Control panel:
DMX Channels:
Funktions:
Working environment: up to 40°C
Protection rate:
Dimension size:
N.W:
AC100-240V，50Hz/60Hz
36W
240×10mm LED R96,G72,B72
Digital LED Display
2,3,4,7,14,26 Channels
Sound, Auto, Static Color, DMX
IP20
1000×64.5×66mm
2,5kg
7