Transport And Packaging; Appliance Equipment; Installation - BOMANN VS 2195 Bedienungsanleitung

• Use the provided collection points of electrical equipment for the dis-
posal of the appliance.
Coo Coolant Coo Coo lant lant lant
WARNING WAR NING: : : :
WAR WAR NING NING
The coolant circuit of this appliance contains the
refrigerant Isobutane (R600a), a natural gas that is
flammable and of high environmental compatibility.
Make sure no parts of the coolant circuit get dam-
aged during transport and installation of the appli-
ance.
If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged: If the coolant circuit is damaged:
• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is
installed and
• contact an authorized technician.
Transport

Transport and Packaging

Transport Transport
Transport the appliance Transport th e appliance
Transport th Transport th e appliance e appliance
Transport the appliance, if possible, only in vertical
position. Otherwise, it is absolutely necessary to
allow the appliance standing upright for a few hours
before installation "Prior to first use". Protect the ap-
pliance during transport against weather influences.
Unpack the appliance Unpack the appliance Unpack the appliance Unpack the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: Transport protection! CAUTION: Transport protection!
CAUTION: Transport protection! CAUTION: Transport protection!
Pull off the foil from the appliance sides.
and Packaging
and Packaging and Packaging
NOTE: : : : NOTE
NOTE NOTE
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".

Appliance Equipment

Appliance Equipment
Appliance Equipment Appliance Equipment
Appliance overview Appliance overview
Appliance overview Appliance overview
1 1 1 1 Temperature control / interior light
2 2 2 2 Height-adjustable glass shelves
3 3 3 3 Vegetable box with glass cover
4 4 4 4 Adjustable feet
5 5 5 5 Door storage racks
Delivery scope Delivery scope
Delivery scope Delivery scope
2 x height-adjustable glass shelf, 1 x vegetable box
with glass cover, 3 x door storage rack, 2 x egg tray,
1 x door handle incl. fixing screws with covers
Condition Condition Conditions for the installation location Condition s for the installation location s for the installation location s for the installation location
• Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
Gap to the back and to the side walls each
-
approx. 5 cm;
Place the appliance so that the appliance door
-
can open without being impeded.
16

Installation

Installation Installation Installation