Connection To The Chimney - wiking Atomic Bedienungsanleitung

English

Connection to the Chimney

The chimney must be of a proper height to ensure that the draft is sufficient and that smoke
does not become bothersome. If the chimney is so high that it cannot be cleaned from the
top, an easily accessible cleaning hatch must be installed. We recommend, however, that you
always contact your local chimney sweep before purchasing a chimney.
Draft and Clearance Requirements
Nominal draft: Approximately 2 Pascal/.2 mm water gauge.
Minimum clearance: Ø50 mm, which corresponds to your WIKING wood-burning stove's
exhaust pipe.
Adjustment Damper
WIKING recommends equipping the chimney or smoke pipe with an adjustment damper, so
that the chimney draft can be regulated on days with high winds. The adjustment damper must
not be able to completely close the smoke pipe. There must always be an open space the size
of at least 20% of the chimney or smoke pipe's total clearance area.
23