Two-Step Presser Foot Lever; Attaching The Presser Foot Holder - Silvercrest SNM 33 B1 Bedienungs- Und Sicherheitshinweise

Two-step presser foot lifter

Attaching the presser foot holder

A
B
1
E
3
E
C
D
F
2
G
4
When sewing several layers or thick fabrics,
the presser foot can be raised a second
stage for easy positioning of the work. (A)
Attention:
Turn power switch to off ("O") when
carrying out any of the above operations!
1. Raise the presser bar (A) with the
presser foot lifter. Attach the presser foot
holder (B) as illustrated.
2. Attaching the presser foot
Lower the presser foot holder (B) using
the presser foot lifter, until the cut-out (C)
is directly above the pin (D)
The presser foot (F) will engage
automatically.
3. Removing the presser foot
Raise the presser foot using the presser
foot lifter.
Raise the lever (E) and the foot
disengages.
4. Attaching the edge/ quilt guide
Attach the edge/ quilt guide (G) in the
slot as illustrated.
Adjust as needed for hems, pleats,
quilting, etc.
Getting ready
GB / IE 11