Power Function; Power Management; Chef Function - Electrolux EHH9967FOG Benutzerhandbuch

1.
Touch ( comes on in the dis-
play).
2. Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14

4.6 Power function

The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for a
limited period of time ( see Technical In-
formation chapter). After that, the induc-
tion cooking zone automatically sets back
to highest heat setting. To activate, touch
, comes on. To deactivate, change
the heat setting.

4.7 Power management

The power management divides the pow-
er between two cooking zones in a pair
(see the illustration). The power function
increases the power to the maximum level
for one cooking zone in the pair. The
power in the second cooking zone auto-
matically decreases. The heat setting dis-
play for the reduced zone changes be-
tween two levels.

4.8 Chef function

The Chef function activates all cooking
zones and automatically activates the
comes on
Bridge function for all of the zones. This
function sets the same heat setting as the
one you set the last time.
For the first activation the heat setting of
the left pair of zones is set to
middle pair is set to
is set to
To activate this function:
• Touch
All cooking zones operate for 9 mi-
nutes. If the cooking zones stay empty,
the symbol
nutes an acoustic signal sounds and
the empty cooking zones are set to
.
To resume this function:
• Touch
the deactivated pair of cooking zones.
To deactivate this function:
• Touch
tion for the cooking zones you chose
and keep the last heat setting of the
cooking zones for this pair. The indica-
tor goes off.
• Set the heat setting to
Count Down Timer deactivate the
cooking zones. The indicator goes off.
When the Chef function is off, the pot de-
tection time is 2 minutes.
4.9 The Timer
The Count Down Timer.
Use the Count Down Timer to set how
long the cooking zone operates for only
this operation.
Set the Count Down Timer after the
selection of the cooking zone.
ENGLISH
and the right pair
.
, and the indicator comes on.
comes on. After 9 mi-
to put or move cookware on
to deactivate the Chef func-
The selection of the Timer function
is possible for cooking zones that
are active and after the heat set-
ting is set.
9
, the
or let the