Rear Spacers; Door Reversibility - AEG S83400CTM0 Benutzerinformation

46 www.aeg.com

REAR SPACERS

LEVELLING

DOOR REVERSIBILITY

2
1
3
4
A
B
E
F
C D
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the opera-
tions.
• Open the doors. Unscrew the middle
hinge (B). Remove the plastic spacer (A)
• Remove the spacer (F) and move to the
other side of the hinge pivot (E).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C, D) and move to the
other side.
• Fit the pin of the middle hinge (E) into
the left-hand hole of the lower door.