Auxiliary Functions; Warning Symbols - Beko DPU 8305 XEL Bedienungsanleitung

Auxiliary functions

Audio Warning
The machine will give an audio warning when the
programme comes to an end. If you do not want
the machine give an audio warning, press the
Volume Level button repeatedly until "x" appears
on the display. Use the same button to adjust the
volume level.
C
You can activate this function either before or
after the programme starts.
Cancel Audio warning
audio warning level 1
Dryness level
Used to adjust the required dryness level. More
drying is performed compared to the default
settings when "+" sign appears and less drying
is performed when "-" sign appears. Programme
duration can change depending on the selection.
C
You can activate this function only before the
programme has started.
Anti-creasing
You can use Anti-creasing function to prevent
laundry from creasing if you will not take the
laundry out after the program has come to an end.
This program rotates the laundry in every 240
second for 2 hours to prevent creasing.
Anti-creasing is activated but the programme is
still running in the first display image below. Drying
cycle is completed and the Anti-creasing step has
started in the second display image.
C
Press Anti-creasing button to activate this
function.
Audio warning Audio warning
level 2 level 3
Changing the contrast
Adjust the display contrast in order to make the
symbols on the display appear clearer. It may
particularly be necessary to change the contrast
setting of the display when the dryer is installed
over a washing machine.
Press and hold the Spin Speed / Timer Programme
button for 3 seconds.
When the contrast is changed, all symbols on
the display will appear for 3 seconds in order to
indicate that the process is complete.
C
Perform the same procedure to revert back to
the previous contrast setting.

Warning symbols

C
Warning symbols may differ according to the
model of your machine.
Lint filter cleaning
When the programme is completed, a warning
symbol will appear to remind that the filter needs
to be cleaned.
C
If the Filter Cleaning symbol flashes
continuously, refer to "Troubleshooting" section.
Water tank
When the programme is completed, a warning
symbol will appear to remind that the water tank
needs to be drained.
If the water tank becomes full while the
programme is running, the warning symbol will
start to flash and machine will pause. Drain the
water in the water tank and press Start / Pause
/ Cancel button to resume the programme. The
warning symbol turns off and the programme
resumes operating.
Cleaning of filter drawer
Warning symbol flashes with certain intervals to
remind that the filter drawer needs to be cleaned.
43 EN