•
Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is
switched on.
Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced.
•
End/Anti-creasing symbol is on.
•
Anti-creasing programme is activated in order to prevent laundry that has remained in the machine
from creasing. >>> Turn off the dryer and take out the laundry.
End symbol is on.
•
Programme is over. Turn off the dryer and take out the laundry.
Lint Filter Cleaning symbol is on.
Lint filter is not cleaned. >>> Clean the lint filter.
•
Lint Filter Cleaning symbol is flashing.
•
Filter housing is clogged with lints. >>> Clean the lint filter housing.
A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter
•
with warm water.
•
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
Water leaks from the loading door
•
Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading
door gasket. >>> Clean the inner surfaces of the loading door and the surfaces of
the loading door gasket.
Loading door opens spontaneously.
•
Loading door is ajar. >>> Push the loading door to close until you hear a locking
sound.
Water Tank warning symbol is on/flashing.
Water tank is full. >>> Drain the water tank.
•
•
Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check
the water drain hose.
Filter Drawer Cleaning warning symbol is flashing.
Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter
•
drawer.
A
If you cannot eliminate the problem although you follow the instructions in this section, consult your
dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
52 EN