Childproof Lock; Changing The Programme After It Has Started - Beko DPU 8305 XEL Bedienungsanleitung

Iron Dry
Starts to illuminate when the dryness level reach
Iron Dry step.
Cupboard Dry
Starts to illuminate when the dryness level reach
Cupboard Dry step.
Extra dry
Starts to illuminate when the dryness level reach
Wardrobe Dry Extra step.
Ventilation
Ventilation symbol illuminates when the
programme comes to an end.
C
Anti-creasing symbol will illuminate at the end
of the programme if Anti-creasing function is
activated.
Child-proof Lock
Machine is equipped with a Childproof Lock which
prevents interfering with the current programme
flow by pressing any button. All buttons except
the On / Off button on the control panel are
deactivated when the Child-proof Lock is active.
In order to activate the Childproof Lock, press
Audio Warning and Anti-Creasing buttons
simultaneously for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child-proof Lock should be
deactivated. Press the same buttons for 3 seconds
again to deactivate the Child-proof Lock.
C
Lock symbol will appear on the display when
the Child-proof Lock is activated.
C
Child-proof Lock is deactivated when the
machine is switched off and on with On / Off
button.
When the Child-proof Lock is activated:
• Display symbols will not change even if the
position of Programme Selection knob is
changed while the machine is running or in
halt.
• If the Child-proof Lock is deactivated after
changing the position of the Programme
Selection knob while the machine is running,
the machine stops and new programme
information is displayed.
Changing the programme after it has
started
After the machine starts, you can change the
selected programme and dry your laundry in a
different programme.
1. If you want to select Extra Dry programme
instead of Iron Dry programme, press and
hold the Start / Pause / Cancel button for 3
seconds to cancel the programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press Start / Pause / Cancel button to start
the programme.
C
You can also select a new programme by
turning the Programme Selection knob
while the machine is operating. In this case,
current programme is aborted and the new
programme information appears on the
display.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying
programme has started:
1. Press Start / Pause / Cancel button to switch
the machine to Pause mode. Drying process
will stop.
2. While in Pause mode, open the loading door,
add or take out laundry and close the loading
door.
3. Press Start / Pause / Cancel button to start
the programme.
C
Any laundry added after the drying process
has started may cause the clothes that are
already dried in the machine intermingle with
45 EN