Important Safety Instructions; General Safety - Beko DPU 8305 XEL Bedienungsanleitung

1

Important safety instructions

This section contains safety instructions that will
help protect from risk of personal injury or property
damage. Failure to follow these instructions shall
void any warranty.

General safety

• Never place the product on a carpet-covered
floor; otherwise, lack of airflow beneath
the machine will cause electrical parts to
overheat. This will cause problems with your
product.
• Do not operate the product if the power cable
/ plug is damaged. Call the Authorized Service
Agent.
• Do not make any changes on the plug
supplied with the product. If it is not
compatible with the socket, have a qualified
electrician change the socket with a suitable
one.
• Never touch the plug with wet hands! Never
unplug by pulling on the cable, always pull out
by grabbing the plug.
• Connect the product to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
• Power cable of this product is equipped with
a conductor and a grounding plug that allows
for grounding the product. This plug must
be inserted into a socket which is installed
and grounded in accordance with the local
laws and regulations. Grounding installation
decreases the risk of electric shock by
opening a path with low resistance for the
electricity flow in case of a malfunction or
failure. Do not neglect to have the grounding
installation made by a qualified electrician.
If you have any suspect about the grounding
installation, have it checked by a qualified
electrician or the Authorized Service Agent.
Our company shall not be liable for any
damages that will arise when the product is
used without grounding in accordance with
the local regulations.
• The product should not be plugged in during
installation, maintenance, cleaning and repair
works.
• Always have the installation and repairing
procedures carried out by the Authorized
Service Agent. Manufacturer shall not be
held liable for damages that may arise from
procedures carried out by unauthorized
persons.
• Do not use electrical devices in the product.
• Do not connect the air exit of the product to
the chimney holes which are used for the
exhaust fumes of the devices operating with
gas or other types of fuel.
• You must provide enough ventilation in
order to prevent gases exiting from devices
operating with other types of fuels including
the naked flame from accumulating in the
room due to the back fire effect.
• Pay attention that the air inlet openings are
unobstructed
• Items cleaned or washed with gasoil/fuel oil,
dry-laundry solvents and other combustible
or explosive materials as well as the items
that are contaminated or spotted with such
materials should not be dried in the product
since they emit flammable or explosive vapor.
• Do not dry the laundry cleaned with industrial
chemicals in the dryer.
• Underwear that contains metal reinforcements
should not be dried in the dryer. Dryer can get
damaged if metal reinforcements come loose
and break off during drying.
• Never attempt to repair the product yourself.
Do not perform any repair or replacement
procedures on the product even if you know
or have the ability to perform the required
procedure unless it is clearly suggested in the
operating instructions or the published service
manual. Otherwise, you will be putting your
life and others' lives in danger.
• For failures that you cannot remedy by
applying the procedures in safety instructions,
turn off and unplug the product and call the
Authorized Service Agent.
29 EN